Product Description
Submersible pump
hot water submersible pump
QJR hot water submersible pump
QJR hot water submersible pump product instruction
QJR series of well water submersible pump is composed of a
waterpump and well water submersible three-phase asynchronous
motoris directly connected to the. Heat the water temperature can
reach 100 ℃, diving in geothermal water, effective tool for
extractinggeothermal, geothermal energy is a new energy is cheap,
clean,widely used for heating, bathing, medical, breeding,
cultivation,agricultural, industrial and mining enterprises,
entertainment and many other aspects of health care facilities.
QJR well with hot water submersible pump is a pump machine, has the
advantages of simple structure, reliable operation, no noise,good
performance, high efficiency, convenient installation and
repairunit, and has heat resistance, anti-corrosion, anti-aging and
many other characteristics, is the extraction of hot new
products.
QJR hot water submersible pump struction instruction
QJR series of well water submersible pump units include: hot
water,hot water submersible pump submersible motor (including
heat-resistant cable), a water pipe and a control switch (high lift
pumpwith valve) four parts.
1. Hot water submersible pump single suction multistage centrifugal
pump, the guide housing, impeller, seal ring, the conical
sleeve,pump shaft, bearing, heat water festival. Inverse main parts
valveand valve body.
2. Hot water submersible motor for sealing water wet the
three-phase asynchronous motor, composed of a stator, rotor, upper
and lower bearing seat, anti sand device, adjustable pressure
device of main parts.
3. Hot water pump and water diving motor through a sleeve
couplingor claw coupling directly into one, consisting of hot
watersubmersible pump.
4 .Hot water submersible motor upper mounting sand cover and two
reverse assembly skeleton oil seal, namely anti sand
device.According to user needs, can be installed sand sealing
module.
5 .The connection of hot water submersible pump every class
isconnected guide housing thread and stop positioning keyway
fixing,impeller and pump shaft must be assembled by the position of
the chassis dedicated.
6 .Heat resistant submersible motor stator and on the lower bearing
seat and a base, a connecting seat, fixed, the double headed
boltsealing rubber ring and the end stop opening positioning close
connection.
7 .The motor is arranged on the upper end of hot water
injection hole, vent hole, the lower end is provided with a drain
hole, when the electric pump, hot water submersible motor cavity to
be filled with pure water, pay attention to prevent the false man,
on eachhole plug, no water leakage phenomenon.
QJR hot water submersible pump use condition
1.The solid content of not more than 0.01% (weight
ratio);
2. The pH of water pH value was in the range of 6.5~8.5;
3 .Of chloride ion content in water is not more than 400mg/l;
4 .Mineralization degree greater than 4000mg/l;
5 .Sulfate is not more than 1000mg/l;
6 .Ammonium ions does not exceed 1mg/l;
7. Fuorine ion is less than 4mg/l;
8 .Hydrogen sulfide is not more than 1mg/l;
9 .The frequency of 50Hz (allows of no more than ± 1%), rated
voltage of 0.38/0.66kV, 0.66/1.14kV, 3kV, 6kV (tolerance of ±
5%)three-phase AC power supply;
10.The motor cavity to be filled with purified water;
Should be honest, smooth, not a convex or tube
malposition
11 .Tube wells, well diameter not less than water submersible pump
usingcaliper.
QJR hot water submersible pump main parameter
1: The allowable working temperature range: +5 to +125 ℃
2: Solid impurity content (mass ratio) is less than 0.01%
3: PH value (PH) 6.5-8.5
4: Hydrogen sulfide content is not more than 1.5mg/L
5: The chloride ion content is not more than 400mg/L
6: Unit must complete invasion of no water. Vertical type, select
the model when the hole diameter and the pump model to match
thediameter hole, avoid large diameter of the small diameter of the
pump, so that is not conducive to heat dissipation of the
motor.
Country: |
China |
Model No: |
QJR hot water submersible pump
|
FOB Price: |
( Negotiable ) (Negotiable)
Get Latest Price
|
Place of Origin: |
- |
Price for Minimum Order: |
- |
Minimum Order Quantity: |
1 |
Packaging Detail: |
standard export packaging |
Delivery Time: |
7 days after confirm the order |
Supplying Ability: |
5000 Set per Month |
Payment Type: |
PayPal, Western Union, T/T |
Product Group : |
Pumping Equipment
|